Fast Cure Toilet waterproofing PS8800
Two-component Polyaspartic waterproofing varnish, direct to tile, for hand applications
DESCRIPTION
PS 8800 is solvent-free,two-component, hand-applied, Polyaspartic clear coating.
FIELDS OF APPLICATION
PS 8800 is used in kitchen, toilet, and shower room waterproofing applications.
FEATURES AND BENEFITS
- fully bonded to the tile surface
- low odor
- excellent anti-slip property
- cures fast, ready for use after 8-12 hours
- convenient application
- visible waterproofing
COLOUR
PS 8800 is a colorless clear coating.
APPLICATION METHOD
(a) Surface preparation& Repair
Clean the tile surface, and get rid of the dust and grease.
(b) Brush the vertical surface
Mix component A and component B with the ratio of 1: 0.45, make it stirred thoroughly. The height of the vertical surface is recommended to be higher.
than 1.5m, coverage is 0.2 kg/m2- 0.3 kg/m2( thickness about 0.15mm-0.25mm)
Begin the process at the top of the wall and work down to the floor. Complete the walls first and then begin the process on the floor.
- Brush the flooring surface.
Mix component A and component B with the ratio of 1: 0.45, make it stirred thoroughly. Recommended coverage is 0.3 kg/m2-0.4 kg/m2( thickness about 0.2mm-0.3mm)
Using a natural-bristle brush, apply one coat covering all surface area evenly with a layer of PS 8800.
Keep the room ventilatory for 8-12 hours; then open for use.
PROPERTIES
| Color | Colorless |
| Gloss | High Gloss |
| Solid content by weight | ≥95% |
| Flash Point | 93℃ |
| Viscosity | 1300±168 CPS |
| Coverage | 3 M2/KG |
| Tensile strength | ＞15 MPa |
| Working time | 30 Min- 2 Hour |
| Adhesion | 9.7Mpa to the tile surface 4.5Mpa to concrete |
| Elongation at break | 300%-400% |
Learn polyaspartic knowledge: Polyaspartic FAQ
Product Tags:
|
|
Toilet Waterproofing Polyaspartic Polyurea Coatings Images
|
